1/2'' 12V DC Gravity Feed Plastic Solenoid Valve

Availability: In Stock

Technical Details

Position Normally Closed
Port Size 1/2" Male NPT
Voltage 12V DC
Body Material POM Plastic
Components Stainless Steel
Seal Material EPDM Diaphragm
Orifice Size 8.5 mm
Temp Range 32 to 125° F / 0 to 50°C
PSI Range 0-3 PSI (Gravity Feed)
Flow Rate Cv 0.6 (Appx 0.6 GPM @ 0 PSI Gravity)
Power 6 Watts
Coil Connection Terminal
Response Time Fast Acting (Less than one second)
Duty Cycle 100% but not indefinitely
*Suitable Media Water – Liquid - *Etc
Weight 4.10 oz
Height 2.39"
Length 2.85" port to port
Width 1.65"

Product Overview

The APLG series solenoid valve is specifically designed for low pressure, gravity feed, liquid applications. This valve operates within a range of 0 to 3 PSI, or maximum of 3 feet of head, making it a great option for dispensing applications. The valve is configured in the normally closed position and requires power to open. Removing power will put the valve back into the closed position.

The valve body is molded from POM plastic with stainless steel internal components and an EPDM seal. The male ports are ½” NPT thread that can be connected to female NPT fittings. The valve is unidirectional which means the valve will only flow from the inlet port out through the exhaust port. An internal filter screen is pre-installed to prevent debris from entering and clogging the valve body.

This valve is perfect for low power applications because the 12V coil requires approximately 600mA to actuate. The coil can be attached with terminal connectors and has no polarity. It is fast acting and changes position in less than one second.

*This valve is not intended for applications that go beyond the 3 PSI max.