1-1/2" 24V AC Stainless Electric Solenoid Valve
Availability: In Stock
Technical Details
SKU
SZW-40-24VAC
Position
Normally Closed
Port Size
1-1/2" Female NPT
Voltage
24V AC
Body Material
Stainless Steel
Components
Stainless Steel
Seal Material
Viton® Diaphragm
Orifice Size
40 mm
Temp Range
15 to 250° F / -10 to 120°C
Pressure Range
Water: 0-90 PSI | Air 7-90 PSI
Flow Rate
Cv 29 (Appx 220 GPM @ 60 PSI)
Power
40 Watts / 1.75 Amps
Coil Connection
DIN 43650A
Response Time
Fast Acting (Less than one second)
Duty Cycle
100% but not indefinitely
*Suitable Media
Water – Air - Fuel - *Etc
Weight
4 lb 14 oz
Height
6.00"
Length
4.33" port to port
Width
3.35"
Product Overview
The 1-1/2” Stainless Steel Body, 24 Volt AC Valve is one of our larger Stainless valves we stock. This is a 2 Way solenoid valve in a Normally Closed position. This is a fast acting, high flow solenoid valve with a 40 mm orifice. This solenoid valve uses a Viton seal and can handle various media types such as air, water, gas, diesel fuel, weak acids and many more.
This valve is gravity capable meaning it requires no differential pressure to operate. The valve will work with a minimum of 0 PSI up to a maximum of 145 PSI. The orifice in this valve is 40mm. The valves flow rate can be calculated using the Cv value of 29. This means the valve will flow approximate 220 GPM at 60 PSI. The temperature range for this valve is between 15°F and 250°F.
The IP54 coil has no polarity making power and ground interchangeable. There is an arrow indicating the direction of flow on the stainless steel valve body. Installed with the coil up is the preferred method however the valve will operate in any position. A pre-filter should be installed to prevent debris from obstructing the orifice which would cause the valve to leak.
*Consult a chemical compatibility expert for correct seal and valve body material choice.
