1/4'' 24V DC Push Connect Plastic Solenoid Valve

Availability: In Stock

Technical Details

Position Normally Closed
Port Size 1/4" Quick Connect
Voltage 24V DC
Body Material Polypropylene Plastic
Components Stainless Steel
Seal Material EPDM Diaphragm
Orifice Size 2 mm
Temp Range 25 to 175° F / -5 to 80°C
PSI Range 3 - 115 PSI (Minimum Required)
Flow Rate Cv 0.2 (Appx 1.5 GPM @ 60 PSI)
Power 5 Watts
Coil Connection Terminal
Response Time Fast Acting (Less than one second)
Duty Cycle 100% but not indefinitely
*Suitable Media Water – Air - *Etc
Weight 4 oz
Height 2.30"
Length 2.50" port to port
Width 1.34"

3D Models

Product Overview

Model RSC-A2-24VDC is a 1/4" solenoid valve with convenient push to connect fittings. These fittings will accept a 1/4" OD hose. The valve body is made from plastic with stainless steel internal components. The valve can easily be mounted with 4 mm machine screws via the legs on the bottom of the valve body.

This is a uni-directional valve that only allows flow in a single direction. The operating pressure is from 3 - a maximum of 115 PSI. The unit as a 2 mm internal orifice.

This specific plastic valve has a 24 Volt DC coil with a voltage range that is -+ 10. Its response time is very low; in fact, it acts in less than one second, making it a great choice for all types of applications.