3/8'' 110V AC Electric Brass Solenoid Valve
Availability: In Stock
Technical Details
SKU
BZW-10-110VAC
Position
Normally Closed
Port Size
3/8" Female NPT
Voltage
110V AC
Body Material
Brass
Components
Stainless Steel
Seal Material
Viton® Diaphragm
Orifice Size
15 mm
Temp Range
15 to 250° F / -10 to 120°C
Pressure Range
Water: 0-145 PSI | Air 7-145 PSI
Flow Rate
Cv 3.5 (Appx 27 GPM @ 60 PSI)
Power
15 VA / 0.20 Amps
Coil Connection
Lead Wires
Response Time
Fast Acting (Less than one second)
Duty Cycle
100% Duty at Rated Ambient Temperature
*Suitable Media
Water – Air - Fuel - *Etc
Weight
1 lb 9 oz
Height
4.00"
Length
2.36" port to port
Width
1.80"
Product Overview
The 3/8" 110V AC Electric Brass Solenoid Valve (Normally Closed), model BZW-10 series, is a two-way, semi-direct lift valve designed to operate in a normally closed position. With two ports for media flow, the valve opens when energized to allow media to pass through and closes when power is removed. It is compatible with a wide range of media, including hot water, air, gas, diesel fuel, Freon, weak acids, and weak alkali. Built with a heavy-duty solid brass body, this valve delivers long-lasting durability even in demanding applications.
Featuring a 3/8" female NPT port, this electric solenoid valve is suitable for low-viscosity fluids below 20 cst. It includes a 15mm orifice and offers a Cv value of 4.8. The BZW-10 withstands pressures up to 145 psi (10 bar) and temperatures ranging from 15°F to 250°F. The seal material is FKM (Viton®), ensuring strong chemical resistance and reliable performance.
This model is equipped with a 110V AC coil with a ±10% voltage tolerance. The coil head includes a 5" wire lead for easy connection to your preferred terminals, and the top of the coil is clearly labeled with valve specifications. Its rapid response time—less than one second—makes it ideal for a wide variety of applications.
The BZW-10 can be mounted vertically or horizontally and includes a directional arrow on the body to ensure proper flow orientation. It should not be installed upside down with the coil positioned under the valve.
*Consult a chemical compatibility expert for the correct seal and valve body material choice.
