1/2" UPVC Anti-Corrosive Solenoid Valve
Availability: In Stock
Technical Details
SKU
PAC-15
Position
Normally Closed
Port Size
1/2" NPT Female
Available Voltage
Select Above
Body Material
UPVC
Components
Stainless Steel
Seal Material
Viton®
Orifice Size
15 mm
Temp Range
25°F - 140°F
Pressure Range
4.5 - 85 PSI
Flow Rate
Cv 4.8 (Approx 37 GPM @ 60 PSI)
Power
110V AC: 8 VA, 220V AC: 8 VA, 24V DC: 7W
Coil Connection
DIN 43650A
Coil Class
Class H (356° F)
Response Time
Fast Acting (Less than one second)
Duty Cycle
100% ED (Continuous)
*Suitable Media
Salt Water, Chlorinated Water, Acid, Alkali, Air
Weight
2.43 lbs
Height
5.12"
Length
3.10" port to port
Width
1.77"
CAD Files
Available Upon Request
Product Overview
The PAC-15 is a 1/2" UPVC Solenoid Valve designed for chemical, saltwater, chlorine, and corrosive fluid applications where material compatibility, low power use, and reliable shutoff matter.
System designers use this valve in chemical dosing systems, wastewater treatment equipment, chlorine injection systems, saltwater circulation lines, and industrial process lines that handle mildly to moderately corrosive fluids. The UPVC body resists chemical attack while keeping the valve lightweight and compact. The internal flow path contains no metal wetted parts, helping prevent corrosion, contamination, and premature failure. This makes it easy to install in tight spaces and skid-mounted systems.
The PAC-15 uses a pilot-operated, normally closed design. The valve opens when energized and closes automatically when power is removed. This operating mode supports consistent control in dosing and injection applications where predictable on-off performance is required.
A low-power solenoid coil helps reduce heat buildup and limits electrical demand during continuous operation. The sealed DIN electrical connection and compact coil housing protect the valve in wet or chemically aggressive environments.
With moderate flow capacity, this 1/2" UPVC Solenoid Valve works well in chemical injection skids, recirculation loops, drum transfer lines, chlorine feed systems, saltwater handling systems, and small tank fill or drain circuits that require controlled flow and corrosion resistance.
Always confirm chemical compatibility for UPVC and Viton with your specific media before selection.
