1/4" 24V AC Stainless Electric Solenoid Valve
Availability: In Stock
Technical Details
SKU
SS-3J-24VAC
Position
Normally Closed
Port Size
1/4" Female NPT
Voltage
24V AC
Body Material
316 Stainless Steel
Components
304 Stainless Steel
Seal Material
Viton® Diaphragm
Orifice Size
3 mm
Temp Range
15 to 250° F / -10 to 120°C
Pressure Range
Air: 145 psi | Water: 115 psi | Light Oil: 70
Flow Rate
Cv 0.4 (Appx 3 GPM @ 60 PSI)
Power
10 VA
Coil Connection
Lead Wires
Response Time
Fast Acting (Less than one second)
Duty Cycle
100% but not indefinitely
*Suitable Media
Water – Air - Fuel - *Etc
Weight
10 oz
Height
2.62"
Length
1.60" port to port
Width
1.20"
Product Overview
The SS-3J-24VAC is a direct acting 24 Volt AC, 2 way, 1/4" Stainless Steel electric solenoid valve that can be used for liquid, water, gas and air in a variety of different applications. This valve uses a Viton seal that is compatible with many liquids such as water up to 250°F, weak acids and diesel fuel. This particular valve is Normally Closed which means the valve will only open when power is applied and close when power is removed. This compact valve features a solid stainless steel body, stainless steel components and a copper shading ring with a female NPT threaded port.
This specific valve has a 24 Volt AC coil with a voltage range that is -+ 10. The coil head is fitted with a Wire Lead connection that can easily be connected with your own choice of terminals. Its response time is very low; in fact, it acts in less than one second, making it a great choice for all types of applications.
Customers commonly use the SS-3J-24VAC Valve for Misting Systems, Fountains, Water Filtration, Solar Heating, Aquariums, Automotive, Beer Brewing, Hydroponics, HVAC, Plumbing and everywhere else one of our valves can be applied.
This model is mountable in any position and features a conveniently positioned arrow on the body to indicate the direction of flow.
Connection – No Polarity, + and – can be interchanged.
The valve timing is uncertain, however it is very fast acting. Less than one second.
Mounting position is preferably coil up but can be mounted in any position.
A pre-filter is always recommended to keep the diaphragm free from debris and the valve functioning properly.
*Consult a chemical compatibility expert for correct seal and valve body material choice.
